金山科研平台现货促销

ULVAC爱发科 发电效率特性评价装置 PEM-2

ULVAC爱发科 发电效率特性评价装置 PEM-2

用于热电发电模块的特性评价。给热电发电模块设置最大500℃的温度差，在模块中贯通一维热流Q产生电力P来获得热电转换率η的设备。金山科研平台现货促销特点

采用具有出色温度可控性的红外金像炉，可快速进行模块性能评估和耐久性测试

模块顶部和底部的温差最高可达500℃

能够测量模块内的热量

气缸机构在加热期间能稳定保持接触表面的热阻

判断温度稳定性，自动改变热电发电模块的负荷，自动控制测量温度，测量动作只要软件上设置即可。

金山科研平台现货促销用途

热电发电模块的发电效率测量

通过热循环测试进行模块寿命测试

金山科研平台现货促销规格Measurement valueMeasurement methodModule sizeHeating surface temperature Max.Sample temperature gradientPressure on contact surfaceAtmosphereRequired floor spaceWeightPower sourceGrounding

Conversion efficiency, Power generation amount, Penetration heat amount

One dimensional heat flow input method

Square 30mm×5 to 30mm t (negotiable)

Max. 800 ℃

Approx. 300 ℃ in case of thermal conductivity of Stainless steel of 30 mm t

2MPa

In inert gas

Approx. W3000×D1000 (mm)

Approx. 300 kg

Power : AC 200 V, 1 phase, 4 kVA, One location PC,Pump : AC 100 V, 1 phase, 1 kVA Outlet two locations

Resistance 100 Ω max.one location

Constitution

Sample heating assembly(including frame work)　　1 set

Programmable temperature controller　　1 set

Measurement circuit assembly　　1 set

Vacuum evacuation assembly　　1 set

Data processing unit　　1 set

Constant temperature water circulator(for cooling lower part heat flow measurement block)　　1 set

UtilityRequired floor spaceWeightPower sourceGrounding

Approx. W 3000 × D 1000 (mm)

Approx. 300 kg

Power : AC 200 V, 1 phase, 4 kVA, One locationPC, Pump : AC 100 V, 1 phase, 1 kVAOutlet two locations

Resistance 100 Ω max.one location

Typical example of commercially available module

Power evaluation by temperature and load current

Evaluation of temperature and maximum conversion efficiency